JETech Tempered Glass Screen Protector for iPhone SE 3/2 (2022/2020) - 4.7-Inch, 3-Pack

Easy to use and replace, no cracked screens since I started, clear instructions, good price.
Read more

Amazing quality and value for money. Does a great job at protecting the screen
Read more

Let’s face it - no screen protector is ‘easy’ to install. But this is probably the easiest of the many I’ve tried (that weird frame thing with a much more expensive rival brand drove me bonkers). I liked the three stage cleaning that came with this and the fact you get three screens. For the first time EVER I got the thing on my phone without a single smear, hair or speck of dust, and no bubbles either! The drawback for me is that my phone is a 2020 SE and as many have mentioned, the protector doesn’t reach to the edges of the screen - you end up with a couple of millimetres all around the edge. However if your case has a raised lip as mine does, it doesn’t seem to matter about the slight gap. And it’s MUCH better value that the “other brand” which did cover the whole screen. And did I mention I got NO bubbles, hair, dust etc?? A winner.
Read more

Very satisfying screen protector!
Read more

Really pleased with the finished result. No bubbles. Perfectly clear screen. Touch all works fine. Only needed one of the 3 screens provided. Yes it is a smaller than the full glass area, but it has to be, because the phone's glass front curves away. But the fit is that good it almost looks like the phone's glass was manufactured that way. Needless to say, my suggestions here are in addition to the instructions that come with it! First thing I did was to check I had the correct part, given the packaging does not say what phones they are for. If you check the original Amazon description, the part specific to iPhone SE 2020 has a part number starting 0807, whereas the older iPhone 7/8/SE part has a part number starting 0806, so be sure you have the 0807 part. When it comes to fitting the protector, preparation is key. I used a freshly cleaned tray, with some kitchen towel on it, and with all the bits to hand. And I made sure to do it at a time when I was not pushed for time; this is not a job to feel you need to rush at! One thing I did that the instructions don't tell you, was to clean the BACK of the phone, to be sure the hinge stickers stay stuck on properly while you need them to. Did this with the cleaning swab and drying off cloth that comes with the kit. The hinge stickers stayed firmly stuck in place all the time I needed them to. Then with hinge stickers in place on the back, and with the screen protector aligned on the top, ensure to keep the hinge tapes slack-free when pulling them round and sticking across onto the protector; just tight enough to ensure no slack. Once the hinges are on, then double check - gently pull the screen protector to the left (assuming hinges on right) against the hinges, and check it is aligned spot on. For alignment I used the slotted hole at the top and the home button cut-out at the bottom. If not quite right then just adjust the hinge positions until OK. Once the phone's screen is dust free as per instructions, then after removing the protective strip, you can just lay the screen down, pulling to the left against the hinges as you do so - if you did the previous bits OK then it will be lined up perfectly. Yes there will be bubbles, but no worries - they are easy to sort and no need to rush when sorting them. As the instructions say, just gently lift corners, then smooth the bubbles back out towards the corners again. Took a few goes in some cases, but it did work well. Very pleased with the finished result. Been in my pocket a few days now, with no sign of any scratches so far.
Read more

A good protector for new iPhone SE 2000 ( 2 gen) Easy to fit.
Read more

I’ve had screen protectors before where the protector is in a box that aligns it to your phone for you, so I was surprised to find you have to use stickers to manually align this one. Miraculously, I managed to align it quite well, but it was a bit stressful. There was an air bubble remaining, so I lifted the corner as suggested and managed to get it out no problem. The package comes with three protectors, which I hadn’t realised. I hope I only ever need this one.
Read more

I replace these screen protectors every few weeks in our house as invariably someone drops their phone and the protector smashes. I have given a 4 star as although I think the product is good, I would expect it to last longer than one drop of the phone.
Read more

Muy bien, mucho fácil para usar!
Read more

Good product
Read more

Die JETech Schutzfolie für das iPhone SE 3/2 (2022/2020) bietet einen hervorragenden Schutz für das Display zu einem sehr guten Preis. Die Folie lässt sich einfach anbringen, ohne Blasen zu hinterlassen, und passt perfekt auf das 4,7 Zoll Display. Mit 3 Stück im Set ist man gut versorgt, falls eine Folie beschädigt wird. Der Touchscreen bleibt trotz der Folie sehr empfindlich und die Anzeige bleibt klar und ohne Beeinträchtigung. Die Folie schützt vor Kratzern und leichten Stößen, ohne die Benutzererfahrung zu beeinträchtigen. Fazit: Eine sehr gute Schutzfolie zu einem fairen Preis – ideal für jeden, der sein iPhone gut geschützt haben möchte, ohne auf Qualität zu verzichten!
Read more

Lo compro regolarmente da ormai 5 anni. Ottimo prodotto, molto resistente, ideale per chi come me è un po’ maldestro e fa cascare spesso il cellulare. La visibilità della schermo non verrà in alcun modo compromessa. Grazie alla protezione offerta, il davanti del mio smartphone sembra quello di uno appena comprato. All’interno della confezione presente anche il kit per installazione (che per quanto rudimentale, fa il suo lavoro) e pulizia. Trovi tutto ciò che serve, non ti servirà comprare altro.
Read more

These protectors have kept my phone in tact since I began using them. They crack from occasional drops, but the phone is always saved from damage with the help of this cover and a back protector. Great price for a three pack. Easy instructions. ⭐️⭐️⭐️⭐️⭐️💯 Update Can not say enough about this screen protector... Thank goodness I had three. My other 4⭐️ review was about to fit over a curved edge screen for the iPhone SE second generation. Despite that one issue for the first install what happens during an issue saved the phone. Having extra screens saved the circumstance even further. These are must-own protectors because they work exceptionally well. My example. During a basic drop, the protector cracked but the screen didn't. I left the slightly cracked screen protector on because it functioned and didn't feel the need to have a new screen on again. About a year goes by. My friend is on the passenger side of the Jeep. Moves the seat. Later that evening I get home. Can't find the phone anywhere. Normally it's in my bag or the median cup holder. Using the find my phone option knows it's I the Wrangler, but still can't find it. Bt this time I’ve rolled the passenger seat forward all the way and back a few times. Can't find the phone. Going over to the passenger side look way under the seat in the mid position meaning middle of the track it slides on. The phone is sticking out about a half-inch from the track crushed under the seat. It’s wedged in so much so it is not removable. At all. I move the seat completely forward shoved it against the window... If you don't have a Jeep, the seat glides fully back or folds forward into the front window off the track. The phone was so wedged into the track face up with a back cover that holds my license and a couple of cards which didn't help. With a bunch of effort was able to unwedge and remove the phone. Amazingly, the protector was crushed in a few spaces. But once removing the actual phone screen was only slightly nicked in two places. I added a new protector to hold the phone screen together while waiting for the repairs the following afternoon. The phone worked with the new protector despite the phone being crushed in two places. Repairs we're complete and the final protect added. I ordered a new pack of protectors to have on hand. Best seven dollars I've ever spent. I can't say thank-you enough for this super economical well explained install protector. Even though my first try didn't get the protection to sit flat this time worked perfectly. The protector sits perfectly flat. ⭐️⭐️⭐️⭐️⭐️💯 must own Update /\ more than a year later Use this screen protector on my iPhone SE 1st gen. Upon reviewing 2nd gen iphone SE reviews decided to purchase. Knowing the risk it wouldn’t stick perfectly around the curved edges. Owning tools for changing an iPhone battery and screen installation find the spatula, with a credit card type of plastic with flexibility could help gentle perfectly assist with sealing the seems. Result, most of the edge sits perfectly on the screen. 1/16th of the edge on one side about an inch long refuses to connect to the screen no matter how much pressure I’ve used with the spatula. I’m not certain if this would affect the ability of the protector to help the phone stay protected. With my SE 1st gen the protector shattered once and the second cracked across the screen at an angle. My previous experience with plastic screens as a part of the protective cover never cracked. My phone did well. No breaks. The protectors appear like bicycle helmets. One use then throw away. The clear plastic screen protectors attached you the cases are more expensive. Unless, you go through protectors like me. Then, maybe it’s worth buying the more expensive case with plastic screen saver. I’ve got three screens with this kit. A nice case. I’m satisfied with the overall appearance and ease of install with my spatula. If you don’t have one use a credit card or any flexible card from your wallet will do well. Even thought the screen instructions say install like a door. My preference is, with the spatula, from top to bottom. Pressing the spatula from one end to the other to get a tight fit. Then, move the spatula around the edges firmly. Until the sides stick. The spatula can also move a tiny bubble out. Press from the middle and move the spatula toward the side. Pushing the ting bubble IF one installed during installation. ⭐️⭐️⭐️⭐️ Four stars. Minus one because I find it impossible install the screen protector perfectly. This may affect the use if the phone drops and the protector isn’t grabbed to the phone. Therefore allowing phone to crack. Make sure to include a hearty strong case, too
Read more